How to Get Wrinkles Out of PVC Projector Screen?

  • on January 27, 2023
  • 197 Views
How to Get Wrinkles Out of PVC Projector Screen?

For a wrinkled PVC projector screen, even just placing it in direct sunlight can help get rid of the wrinkles. Yep, it is that simple.  Other than this, you can make use of the following steps to get the wrinkles out of a projector screen. How cool of me to mention alternatives, I know but the ones I am about to share, I have already talked about them before. Let us get to them right away without any further delay. 

Ironing it up

Using an iron is the riskiest option. Excessive caution is required to prevent damaging your projector screen’s surface. 

1 ) If you still opt for this option despite the availability of alternatives, place your projector screen on a soft cotton cloth to avert scratching the screen. 

2 ) Use minimal heat with the lowest setting until you have a smooth screen. 

3 ) Utilize a moist or dry cloth between the iron and the back of the screen for added protection.

Hair dryer

1 ) An affordable alternative is to use a hair dryer on your screen, but only on the back to avert damage to the projector.

2 ) Then, hang the screen and utilize your blow dryer on minimal heat. 

3 ) You can likewise use a heat gun on its softest setting. That said, this process requires considerable time.

Tension Frame 

A tension mount, also called a tension frame, is an ideal choice for a smooth screen. Some portable screens come with a tension frame, but they are usually made from cheaper materials. The tension mount stretches the screen with latches on the top and bottom of the screen. If you are discovering how to construct a projector screen, make sure you have the right specifications to retain the tension for the screen.

Recommended Article: How to Get Wrinkles Out of Portable Projector Screen?

Heat Your Home Theater

1 ) In case the tension mount did not fully fix the issue, although most of the time it does work, consider turning up the temperature in your theater room. 

2 ) You can utilize a space heater or your central heating, but the room has to be at least 85 degrees to loosen the screen. 

3 ) The screen will tighten between our tension mount as the room cools, and the wrinkles should be gone.

Conclusion

Of course, with any strategy that you prefer, you might have to repeat the phases a few times pivoting on how intense the wrinkles in your projector screen are. But, with vigilance involved and patience in your efforts, you can get back to relishing a wrinkle-free projection screen in no time. 

Related Article:

How to Make Projector Screen Smaller Without Moving it?

NEC Projector Status Light Blinking Red 6 Times

Blackout Cloth Projector Screen

Article Categories:
Uncategorized

Comments are closed.

Don't Miss! random posts ..