You probably are reading this article because you just bought one of those portable projector screens, those fabric material screens that actually when you got it were probably all folded up, and when you opened it up you probably had all kinds of wrinkles and creases on it. So hopefully the info shared in this article will help you how to get rid of the creases on your portable screen projector display screen. I will be sharing a few methods you can choose from depending on what works for you. An alternative is a must, you know. So, let’s take a closer look at how to apply each of these methods in further detail.So what if you iron it up?
Will ironing make a difference on your portable projector screen?
Using an iron is the riskiest option. Excessive caution is required to prevent damaging your projector screen’s surface.
1 ) If you still opt for this option despite the availability of alternatives, place your projector screen on a soft cotton cloth to avert scratching the screen.
2 ) Use minimal heat with the lowest setting until you have a smooth screen.
3 ) Utilize a moist or dry cloth between the iron and the back of the screen for added protection
Hair dryer
1 ) An affordable alternative is to use a hair dryer on your screen, but only on the back to avert damage to the projector.
2 ) Then, hang the screen and utilize your blow dryer on minimal heat.
3 ) You can likewise use a heat gun on its softest setting. That said, this process requires considerable time.
Tension Frame
A tension mount, also called a tension frame, is an ideal choice for a smooth screen. Some portable screens come with a tension frame, but they are usually made from cheaper materials. The tension mount stretches the screen with latches on the top and bottom of the screen. If you are discovering how to construct a projector screen, make sure you have the right specifications to retain the tension for the screen.
Recommended Article: How Big is a 300 Inch Projector Screen?
Heat Your Home Theater
1 ) In case the tension mount did not fully fix the issue, although most of the time it does work, consider turning up the temperature in your theater room.
2 ) You can utilize a space heater or your central heating, but the room has to be at least 85 degrees to loosen the screen.
3 ) The screen will tighten between our tension mount as the room cools, and the wrinkles should be gone.
Conclusion
Of course, with any strategy that you prefer, you might have to repeat the phases a few times pivoting on how intense the wrinkles in your projector screen are.
But, with vigilance involved and patience in your efforts, you can get back to relishing a wrinkle-free projection screen in no time.
Related Article:
How to Make Projector Screen Smaller Without Moving it?
NEC Projector Status Light Blinking Red 6 Times
How to Hide a Projector Screen?